Product
-All handmade
The batons have good stiffness and are designed to withstand all movements during normal conducting.
However, the batons are more vulnerable than those made of fiberglass, carbon and heavier types of wood, when it comes to other physical stress. They are absolutly not suitable for knocking against music stands.
All standard batons are made of cork and balsa alone to achieve super light weight.
Thanks to the perfect combination of balsa and cork, the stick naturally balances around the joint.
All handmade from woods selected for best stiffness and low wight.
This feeling of a super light living stick is achieved by choosing the right piece of wood, adjusting shape of shaft, taper, tip, and balance point.
All these properties playing together in harmony brings the stick to life.
Balance point around the joint is achieved without extra weights placed in the knob.
Stiffness is high to medium, and can be adjusted to you by selecting different peases of balsa wood.
The balsa shafts have very low weight while still having some surface. This allows one to feel the resistance in the air during conducting.
50 EUR + shipping
Standard international shipping: approx
25 EUR, Express/tracking approx 50 EUR
One hand made conducting baton, chosen to meet your desires, within the limits of standards given below,
in relation to:
-the balancing point
-total length
-diameter of the knob
-stiffness of shaft
+ a simple PVC tube for transportation
Wood: | Balsa |
Length:(mm) | 250-350 |
Width: (mm) | 5,5 at knob to 4 |
Balance | Near conjunction |
Taper: | Nearest 1/3 of shaft tip side |
Tip | Rounded to flat |
Stiffness varies slightly from stick to stick. Made from natural materials, this is inevitable. However, I do my best to choose the same stiffness for Your sticks, if you order more than one.
Wood | Cork |
Length: (mm) | ca 35 |
Width: (mm) | 22-29 |
Shape: | Round pear and others |
If you have special wishes beyond the dimensions and materials that apply to the standard pins, you can send a request for this. I only make batons with shaft of balsa. The knots I make mainly with cork, for the best grip, but often combined with other types of wood.
The examples below are still super light (4-7g) despite the fact that other heavier types of wood have been used in the knob/handle. This is achieved by hollowing out parts of the knob/handle. These batons balance in the handle near the conjunction. But sil somewhat further towards the tip in relation to the total length.
Contact me for more information and prices.
(From 70 euro)
Made to be close to standard in action and balance. With extended knob, to avoid holding on to the shaft. This allows a firmer grip.
Weight (g): | 7 |
Length (mm): | 350 |
Balance | Image Above |
Wood: | Balsa |
Length:(mm) | 253 |
Width: (mm) | 5,5 at knob to 3,5 |
Taper: | Nearest 1/3 of baton tip side |
Tip | Rounded |
Surface treatment: | White vax oil |
Wood | Cork and rosewood |
Length: (mm) | 97 |
Width: (mm) | 25 |
Shape: | pear |
Surface treatment: | Beesvax |
Made to be close to standard in action and balance. With extended knob, to avoid holding on to the shaft.
Weight (g): | 5 |
Length (mm): | 345 |
Balance | 24mm of knob |
Shape: | pear |
Wood: | Balsa |
Length:(mm) | 250 |
Width: (mm) | 5,5 at knob to 3,5 |
Balance | 24mm of knob |
Taper: | Nearest 1/3 of baton tip side |
Tip | Rounded |
Surface treatment: | White vax oil |
Wood | Cork and birch |
Length: (mm) | 95 |
Width: (mm) | 25 |
Shape: | pear |
Surface treatment: | Stain Beesvax |
Variations of above style
Four different models of customized knobs.
Combinating stained birch and cork to maintain light weight and good grip
Rounder versions of the combination above
Combination of rosewood and cork. Slim version with extended knob. Experienced as very stiff due to extended knob. Balance point about 30mm into the knob from the joint.
Weight (g): | 7 |
Length (mm): | 360 |
Balance | 30mm on knob |
Shape: | slim |
Wood: | Balsa |
Length:(mm) | 240 |
Width: (mm) | 5 at knob to 3,5 tip |
Taper: | from midle of shaft |
Tip | Rounded |
Surface treatment: | White vax oil |
Wood | Cork and rosewood |
Length: (mm) | 120 |
Width: (mm) | 16 |
Shape: | slim |
Surface treatment: | Beesvax |
Combination of Holly and cork. Coned version with extended knob. Experienced as very stiff due to extended knob. Balance point at the joint.
Weight (g): | 5,6 |
Length (mm): | 350 |
Balance | At Conjunction |
Shape: | Cone |
Wood: | Balsa |
Length:(mm) | 260 |
Width: (mm) | 5,5 at knob to 4 at tip |
Taper: | at tip 1/4 of shaft |
Tip | Rounded |
Surface treatment: | none |
Wood | Cork and Holly |
Length: (mm) | 90 |
Width: (mm) | 15 to 11 (cone) |
Shape: | Cone |
Surface treatment: | Stain Beesvax |
As standard transport packaging I ship with a single pvc pipe, included in the price.
I also make custom cases on request.
Made to fit custom baton. Outer Diameter: 28mm, length: 390mm
Matching wood in details.
All wood case: birch, mahognay, oak, and holly. Holds two standard LWB
Hinge made of birch, axel bolt from oak
Locking mechanism made of holly for wear resistance. Spring made of heat bended birch and mahognay